Journal of Computational Fluids Engineering ISSN:1598-6071(Print) 3022-6252(Online) 한국전산유체공학회지

2018, Lu, L., Gao, Y., Li, Q. and Du, L., "Numerical investigation of tip clearance flow characteristics of a pump-jet propulsor," Int. J. Nav. Archit. Ocean Eng., Vol.10, No.3, pp.307-317.

2015, Zhang, D., Shi, W., van Esch, B.P.M., Shi, L. and Dubuisson, M., "Numerical and experimental investigation of tip leakage vortex trajectory and dynamics in an axial flow pump," Comput. Fluids, Vol.112, pp.61-71.

2015, Zhang, D., Shi, W., Pan, D. and Dubuisson, M., "Numerical and experimental investigation of tip leakage vortex cavitation patterns and mechanisms in an axial flow pump," J. Fluids Eng., Vol.137, No.12, pp.121103.

2016, Nikiforova1, K., Semenov, G., Kuznetsov, I. and Spiridonov, E., "Numerical investigation of tip clearance cavitation in Kaplan runners," IOP Conf. Series: Earth and Environmental Science, Vol.49.

2016, Pogorelov, A., Meinke, M. and Schröder, W., "Effects of tip-gap width on the flow field in an axial fan," Int. J. Heat Fluid Flow, Vol.61, pp.466-481

2018, Qin, D., Pan, G., Huang, Q., Zhang, Z. and Ke, J., "Numerical investigation of different tip clearances effect on the hydrodynamic performance of pumpjet propulsor," Int. J. Comput. Methods, Vol.15, No.5, pp.1850037.

2019, Li, H., Pan, G., Huang, Q. and Shi, Yao., "Numerical prediction of the pumpjet propulsor tip clearance vortex cavitation in uniform flow," J. Shanghai Jiaotong Univ. (Sci.), Vol.25, pp.352-364.

2020, Yuan, J., Chen, Y., Wang, L., Fu, Y., Zhou, Y., Xu, J. and Lu, R., "Dynamic Analysis of Cavitation Tip Vortex of Pump-Jet Propeller Based on DES," Appl. Sci., Vol.10, No.17, pp.5998.

2022, Zhao, X., Shen, X., Geng, L., Zhang, D. and van Esch, B.P.M., "Effects of cavitation on the hydrodynamic loading and wake vortex evolution of a pre-swirl pump-jet propulsor," Ocean Eng., Vol.266, pp.113069.

2005, Camci, C., Dey, D. and Kavurmacioglu, L., "Aerodynamics of tip leakage flows near partial squealer rims in an axial flow turbine stage," Transactions of the ASME J. Turbomach., Vol.127, No.1, pp.14-24.

2002, Gopalan, S., Katz, J. and Liu, H.L., "Effect of gap size on tip leakage cavitation inception, associated noise and flow structure," J. Fluids Eng., Vol.124, No.4, pp.994-1004.

2008, Shavalikul, A. and Camci, C., "Comparative analysis of pressure side extensions for tip leakage control in axial turbines," In Proceedings of ASME Turbo Expo 2008: Power for Land, Sea and Air," Berlin, Germany, June 9-13.

2018, Lei, T., Zhifeng, X., Yabin, L. and Yun, X., "Influence of T-shape tip clearance on performance of a mixed-flow pump," J. Power Energy, Vol.232, No.4, pp.386-396.

2020, Liu, Y. and Tan, L., "Method of T shape tip on energy improvement of a hydrofoil with tip clearance in tidal energy," Renew. Energy, Vol.149, pp.42-54.

2021, Ji, X.Q., Dong, X.Q. and Yang, C.J., "Attenuation of the tip-clearance flow in a pump-jet propulsor by thickening and raking the tips of rotor blades: A numerical study," Appl. Ocean Res., Vol.113, pp.102723.

2022, Kim, J.I., Moon, Y.S., Park, I.R., Kim, J.U., Kim, M.C., Seol, H.S. and Ahn, J.W., "A numerical study on the prediction of the open water performance of a pumpjet propulsor," J. Comput. Fluids Eng., Vol.27, No.4, pp.37-45.

2019, Siemense, Simcenter STAR-CCM+ 14.04.013 User Guide, URL: http://support.sw.siemense.com/ [Accessed 1 February 2019].

1980, Patankar, S.V., Numerical heat transfer and fluid flow. Hemisphere Publishing Corporation.

1994, Menter, F.R., "Two-equation eddy-viscosity turbulence models for engineering application," AIAA J., Vol.32, No.8, pp.1598-1605.

2022, Ahn, J.W., Seol, H.S., Jung, H.S. and Park, Y.H., "Study of the Open-Water Test and Analysis for a Pumpjet Propulsor in LCT," J. Soc. Nav. Archit. Korea, Vol.59, No.3, pp.149-156.

2022, Ahn, J.W., Seol, H.S., Jung, H.S. and Park, Y.H., "Study of the self-propulsion test and analysis for a pumpjet propulsor in LCT," J. Soc. Nav. Archit. Korea, Vol.59, No.5, pp.271-279.