Journal of Computational Fluids Engineering ISSN:1598-6071(Print) 3022-6252(Online) 한국전산유체공학회지

2023, Takeishi, K. and Krewinkel, R., "Advanced gas turbine cooling for the carbon-neutral era," Int. J. Turbomach. Propuls. Power, Vol.8, No.3, p.19.

2018, Zohuri, B. and McDaniel, P., "Combined Cycle Driven Efficiency for Next Generation Nuclear Power Plants," Springer International Publishing, p.978-3.

2022, Wang, Z., Yin, Y., Yang, L., Wang, Y. and Luan, Y., "Similar characteristics of heat transfer in different scale cooling channel with ribs," Heat Transf. Eng., Vol.43, No.12, pp.1025-1040.

2022, Yeranee, K., Rao, Y., Yang, L. and Li, H., "Enhanced thermal performance of a pin-fin cooling channel for gas turbine blade by density-based topology optimization," Int. J. Therm. Sci., Vol.181, p.107783.

2019, Chen, G., Liu, Y., Rao, Y., He, J. and Qu, Y., "Numerical investigation on conjugate heat transfer of impingement/effusion double-wall cooling with different crossflow schemes," Appl. Therm. Eng., Vol.155, pp.515-524.

2011, Li, S.J., Rallabandi, A.P. and Han, J.C., "Influence of unsteady wake with trailing edge coolant ejection on turbine blade film cooling," Turbo Expo: Power for Land, Sea, and Air, ASME, Vol.54655, pp.435-445.

2020, Zhang, J., Zhang, S., Wang, C. and Tan, X., "Recent advances in film cooling enhancement: A review," Chin. J. Aeronaut., Vol.33, No.4, pp.1119-1136.

1994, Fric, T.F. and Roshko, A., "Vortical structure in the wake of a transverse jet," J. Fluid Mech., Vol.279, pp.1-47.

2000, Walters, D.K. and Leylek, J.H., "A detailed analysis of film-cooling physics: part I-streamwise injection with cylindrical holes," J. Turbomach., Vol.122, No.1, pp.102-112.

2022, Zhao, Z., Wang, S., Wen, F., Tang, X., Song, J. and Wang, Z., "Large eddy simulation of compound angle film cooling with vortex generators," Int. J. Therm. Sci., Vol.178, p.107611.

2023, Ouyang, K., Chen, T.Y. and Wu, J.Y., "Numerical study of optimum parameter design for film cooling effectiveness by Taguchi method," Int. J. Heat Fluid Flow, Vol.100, p.109118.

2020, Cao, N., Li, X., Wu, Z. and Luo, X., "Effect of film hole geometry and blowing ratio on film cooling performance," Appl. Therm. Eng., Vol.165, p.114578.

2022, Huang, X., Pu, J., Zhang, T., Wang, J.H., Wu, W.L. and Wu, X.Y., "Effect of length-to-diameter ratio on film cooling and heat transfer performances of simple and compound cylindrical-holes in transverse trenches with various depths," Int. J. Heat Mass Transf., Vol.185, p.122328.

2024, Tian, W., Zheng, K. and Dai, X., "Experimental investigation on the improvement of film cooling efficiency with a V-shaped micro-vortex generator," Int. J. Therm. Sci., Vol.202, p.109087.

2023, Zhang, J., Zheng, Q., Xu, J., Yue, G. and Jiang, Y., "Conjugate heat transfer and flow analysis on double-wall cooling with impingement induced swirling and film cooling," Appl. Therm. Eng., Vol.223, p.120014.

2015, Al-Zurfi, N. and Turan, A., "A numerical simulation of the effects of swirling flow on jet penetration in a rotating channel," Flow Turbul. Combust., Vol.94, pp.415-438.

2013, Kusterer, K., Lin, G., Bohn, D., Sugimoto, T., Tanaka, R. and Kazari, M., "Heat transfer enhancement for gas turbine internal cooling by application of double swirl cooling chambers," Turbo Expo: Power for Land, Sea, and Air, ASME, Vol.55140, p.V03AT12A027.

1998, Lutum, E. and Johnson, B.V., "Influence of the hole length-to-diameter ratio on film cooling with cylindrical holes," Turbo Expo: Power for Land, Sea, and Air, ASME, Vol.78651, p.V004T09A001.

1997, Bardina, J.E.P.G., Huang, P. and Coakley, T., "Turbulence modeling validation," 28th Fluid Dynamics Conference, p.2121.