Original Article
2008, Electric Motors-Alignment of Standards and best practice programmes within APEC, Final Report.
2010, Saidur, R., "A review on electrical motors energy use and energy savings," Renew. Sustain. Energy Rev., Vol.14, No.3, pp.877-898.
10.1016/j.rser.2009.10.0182017, Bramerdorfer, G., Cavagnino, A. and Vaschetto, S., "Cost-optimal machine designs fulfilling efficiency requirements: a comparison of IMs and PMSMs," 2017 IEEE International Electric Machines and Drives Conference (IEMDC), pp.1-8.
10.1109/IEMDC.2017.80020442022, Jang, K., "A Study on the Efficiency Management and Efficiency Improvement of Electric Motors," Trans. Korean Inst. Electr. Eng., Vol.71, No.12, pp.1764-1769.
10.5370/KIEE.2022.71.12.17642022, Sieklucki, G. and Kara, D., "Design and Modelling of Energy Conversion with the Two-Region Torque Control of a PMSM in an EV Powertrain," Energies, Vol.15, No.13, p.4887.
10.3390/en151348872014, Chen, Q. and Yang, X., "Calculation analysis of thermal loss and temperature field of in-wheel motor in micro-electric vehicle," J. Mech. Sci. Technol., Vol.28, pp.3189-3195.
10.1007/s12206-014-0728-82023, Xu, Z., Xu, Y., Gai, Y. and Liu, W., "Thermal Management of Drive Motor for Transportation: Analysis Methods, Key Factors in Thermal Analysis, and Cooling Methods-A Review," IEEE Trans. Transp. Electrif., Vol.9, No.3, pp.4751-4774.
10.1109/TTE.2023.32449072022, Shah, S.H., Wang, X., Azeem, M. and Abubakar, U., "Coupled magnetic field and thermal analysis model for an IPMSM with modular three-phase winding topologies for fault-tolerant applications," IEEE Access, Vol.10, pp.30335-30348.
10.1109/ACCESS.2022.31586722022, Shams Ghahfarokhi, P., Kallaste, A., Podgornovs, A., Belahcen, A., Vaimann, T. and Asad, B., "Determination of heat transfer coefficient of finned housing of a TEFC variable speed motor," Electr. Eng., Vol.103, pp.1009-1017.
10.1007/s00202-020-01132-12022, Sequeira, S., Bennion, K., Cousineau, J.E., Narumanchi, S., Moreno, G., Kumar, S. and Joshi, Y., "Validation and parametric investigations of an internal permanent magnet motor using a lumped parameter thermal model," J. Electron. Packag., Vol.144, No.2, p.021114.
10.1115/1.40531212020, Kang, M., Wang, H., Guo, L., Shi, T. and Xia, C., "Self-circulation cooling structure design of permanent magnet machines for electric vehicle," Appl. Therm. Eng., Vol.165, p.114593.
10.1016/j.applthermaleng.2019.1145932017, Hosain, M.L, Fdhila, R.B. and Ronnberg, K., "Taylor-Couette flow and transient heat transfer inside the annulus air-gap of rotating electrical machines," Appl. Energy, Vol.207, pp.624-633.
10.1016/j.apenergy.2017.07.0112015, Romanazzi, P. and Howey, D.A., "Air-gap convection in a switched reluctance machine," 2015 Tenth International Conference on Ecological Vehicles and Renewable Energies (EVER), pp.1-7.
10.1109/EVER.2015.71129622019, Ghahfarokhi, P.S., Kallaste, A., Vaimann, T. and Belahcen, A., "Thermal analysis of totally enclosed fan cooled synchronous reluctance motor-state of art," IECON 2019-45th Annual Conference of the IEEE Industrial Electronics Society, Vol.1, pp.4372-4377.
10.1109/IECON.2019.89277062023, Gammaidoni, T., Zembi, J., Battistoni, M., Biscontini, G. and Mariani, A., "CFD analysis of an electric motor's cooling system: model validation and solutions for optimization," Case Stud. Therm. Eng., Vol.49, p.103349.
10.1016/j.csite.2023.103349- Publisher :Korean Society for Computational Fluids Engineering
- Publisher(Ko) :한국전산유체공학회
- Journal Title :Journal of Computational Fluids Engineering
- Journal Title(Ko) :한국전산유체공학회지
- Volume : 29
- No :4
- Pages :152-165
- Received Date : 2024-09-23
- Revised Date : 2024-11-07
- Accepted Date : 2024-11-08
- DOI :https://doi.org/10.6112/kscfe.2024.29.4.152
Journal of Computational Fluids Engineering
