Journal of Computational Fluids Engineering ISSN:1598-6071(Print) 3022-6252(Online) 한국전산유체공학회지

2025, Strauss, M.P. and Scott, M.W., “Progress in Rotorcraft Design: 1974–2024,” J. Am. Helicopter Soc., Vol.70, pp.1-33.

2016, Fegely, C., Juhasz, O., Xin, H. and Tischler, M.B., “Flight Dynamics and Control Modeling with System Identification Validation of the Sikorsky X2 Technology Demonstrator,” AHS 72nd Annual Forum, West Palm Beach, FL.

2022, Padthe, A., Lopez, M.J., Berger, T., Juhasz, O., Tobias, E.L. and Glover, E.D., “Design, Modeling, and Flight Dynamics Analysis of Generic Lift-Offset Coaxial Rotor Configurations,” Proceedings of the 78th Annual Forum of the Vertical Flight Society, Fort Worth, pp.10-12.

2022, Yeo, H. and Johnson, W., “Comprehensive Analysis of Coaxial Rotor Dynamics on a Coupled Support Arm System,” AIAA Scitech 2022 Forum.

2021, Lopez, M.J.S., Duffy, C.S., Tischler, M.B. and Ruckel, P., “Bell V-280 Hover Flight Dynamics Model Validation and Update with Flight Test Data,” Vertical Flight Society 77th Annual Forum, Virtual.

2025, Park, K.T., Hwang, Y.H., Lee, B.S., Park, N., Myong, R.S. and Lee, H., “Computational Analysis of Aerodynamic Interference between Fuselage and Pusher Propeller for Coaxial Compound Rotorcraft,” J. Korean Soc. Aeronaut. Space Sci., Vol.53, No.5, pp.491-502.

2022, Yuan, S., Wang, Z. and Cao, Y., “A Hybrid Trim Strategy for Coaxial Compound Helicopter,” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol.237, No.2, pp. 452-466.

2015, Ferguson, K. and Thomson, D., “Performance Comparison between a Conventional Helicopter and Compound Helicopter Configurations,” Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol.229, No.13, pp.2441-2456.

2023, Lee, Y.B. and Park, J.S., “Effect of Blade Tip Configurations on the Performance and Vibration of a Lift-Offset Coaxial Rotor,” Aerospace, Vol.10, No.2, p.187.

2022, Lee, Y.B. and Park, J.S., “Verification Study on Performance and Hub Vibration Load Analysis of a Lift-Offset Coaxial Rotor for Wind Tunnel Testing,” J. Korean Soc. Aeronaut. Space Sci., Vol.50, No.7, pp.497-505.

2013, Renaud, T., Le Pape, A. and Péron, S., “Numerical Analysis of Hub and Fuselage Drag Breakdown of a Helicopter Configuration,” CEAS Aeronaut. J., Vol.4, No.4, pp.409-419.

2016, Reich, D., Shenoy, R., Smith, M.J. and Schmitz, S., “A Review of 60 Years of Rotor Hub Drag and Wake Physics: 1954–2014,” J. Am. Helicopter Soc., Vol.61, No.2, pp.1-17.

2001, Filippone, A. and Michelsen, J.A., “Aerodynamic Drag Prediction of Helicopter Fuselage,” J. Aircr., Vol.38, No.2, pp.326-332.

2015, Batrakov, A., Garipova, L., Kusyumov, A., Mikhailov, S. and Barakos, G., “Computational Fluid Dynamics Modeling of Helicopter Fuselage Drag,” J. Aircr., Vol.52, No.5, pp. 1634-1643.

2010, Schaeffler, N.W., Allan, B.G., Lienard, C. and Le Pape, A., “Progress Towards Fuselage Drag Reduction via Active Flow Control: A Combined CFD and Experimental Effort,” 36^th European Rotorcraft Forum, No. NF1676L-10245.

2023, Kim, T.H. and Park, S.H., “Aerodynamic Measurement and Computational Analysis for the Fuselage Model of High-Speed Compound Rotorcraft,” J. Korean Soc. Aeronaut. Space Sci., Vol.51, No.2, pp.85-92.

2019, Selvaraju, P.N. and Parammasivam, K.M., “Empirical and Numerical Analysis of Aerodynamic Drag on a Typical SUV Car Model at Different Locations of Vortex Generator,” J. Appl. Fluid Mech., Vol.12, No.5, pp.1487-1496.

2024, Kim, S.J., Hwang, Y.H., Myong, R.S. and Lee, H.,“Interactional aerodynamics and acoustics of a rotor with an airframe in hover,” Phys. Fluids, Vol.36, No.1, 027121.

2021, Degrigny, J., Cai, S.-G., Boussuge, J.-F. and Sagaut, P., “Improved Wall Model Treatment for Aerodynamic Flows in LBM,” Comput. Fluids, Vol.227, 105041.

2023, Plelkhanov, M., Ivashchenko, V., Karpenko, A. and Mullyadzhanov, R., “Numerical Simulation of a Turbulent Pipe Flow: FluidX3D LBM Validation,” E3S Web of Conferences, Vol.459, 03010.

2025, Song H.S., Hwang Y.H., Kim S.J., Myong R.S., Lee H., “Numerical Investigation of Propeller Wake Effect on the Wing Aerodynamics with Distributed Electric Propulsion,” J. Comput. Fluids Eng., Vol.29, No.4, pp.24-38.

1997, He, X. and Luo, L. S., “Theory of the Lattice Boltzmann Method: From the Boltzmann Equation to the Lattice Boltzmann Equation,” Phys. Rev. E, Vol.56, No.6, p.6811.

2021, Teruna, C., Avallone, F., Casalino, D. and Ragni, D., “Numerical Investigation of Leading Edge Noise Reduction on a Rod-Airfoil Configuration Using Porous Materials and Serrations,” J. Sound Vib., Vol.494, 115880.

2022, Teruna, C., Rego, L., Casalino, D., Ragni, D. and Avallone, F., “A Numerical Study on Aircraft Noise Mitigation Using Porous Stator Concepts,” Aerospace, Vol.9, No.2, 70.

2023, Hwang, Y.H., Kim, S.J., Cho, K.C., Myong, R.S. and Lee, H., “Computational Analysis of Tip Clearance Effect on Aerodynamic and Acoustic Performance of the Ducted Fan,” J. Comput. Fluids Eng., Vol.28, No.4, pp.106-116.

2011, Allan, B.G. and Schaeffler, N.W., “Numerical Investigation of Rotorcraft Fuselage Drag Reduction Using Active Flow Control,” Proceedings of the American Helicopter Society 67th Annual Forum, No. NFL1676L-12420.

2020, Fu, C., Uddin, M. and Zhang, C., “Computational Analyses of the Effects of Wind Tunnel Ground Simulation and Blockage Ratio on the Aerodynamic Prediction of Flow over a Passenger Vehicle,” Vehicles, Vol.2, No.2, pp.318-341.