All Issue

2024 Vol.29, Issue 1 Preview Page

Original Article

EFFECTS OF PHASE CHANGE FOR COMPRESSIBLE FLUID AND SOLID WALL REGION ON PULSATING HEAT PIPE IN COMPUTATIONAL ANALYSIS

전산 해석에서 압축성 작동유체의 상변화와 고체 벽 영역이 진동형 히트파이프에 미치는 영향

M.J. Son1
,
J.W. Choi2*
손 민재1
,
최 종욱2*
1Department of Aerospace Engineering, Graduate School, Sunchon National Univeristy
2School of Mechanical and Aerospace Engineering/Center for Aerospace Engineering Research, Sunchon National University
1국립순천대학교 일반대학원 우주항공공학과
2국립순천대학교 기계우주항공공학부/우주항공연구센터
*Corresponding Author
31 March 2024. pp. 100-112
PDF XML Citation
Abstract

In this study, the heat transfer processes including the phase change in the pulsating heat pipe were performed numerically. To make the computational analysis, the OpenFOAM program was modified considering the compressible working fluid and the solid wall region. During the phase change process, the circulating liquid and vapor phases were visualized within the pulsating heat pipe. The effects of the compressible working fluid and the solid wall region on the pulsating heat pipe were investigated. The thermal resistance was obtained and compared with the experimental result. This study will make good use of the design and the analysis of pulsating heat pipes.

Keywords
진동형 히트파이프(Pulsating heat pipe)
압축성 유체(Compressible fluid)
상변화(Phase change)
전산 해석(Computational Analysis)
열저항(Thermal resistance)
References
1
1973, unn, P.D. and Reay, D.A., "The Heat Pipe," Physics in Technology, Vol.4, No.3, pp.187. 10.1088/0305-4624/4/3/I01
2
2001,Shafii, M.B., Faghri, A. and Zhang, Y., "Thermal Modeling of Unlooped and Looped Pulsating Heat Pipes," Journal of Heat Transfer, Vol.123, No.6, pp.1159-1172. 10.1115/1.1409266
3
2008, Charoensawan, P. and Terdtoon, P., "Thermal Performance of Horizontal Closed-Loop Oscillating Heat Pipes," Applied Thermal Engineering, Vol.28, No.5-6, pp.460-466. 10.1016/j.applthermaleng.2007.05.007
4
2007, Lin, Y.H., Kang, S.W. and Chen, H.L., "Effect of Silver Nano-Fuid on Pulsating Heat Pipe Thermal Performance," Applied Thermal Engineering, Vol.28, No.11-12, pp.1312-1317. 10.1016/j.applthermaleng.2007.10.019
5
2010, Shaffi, M.B., Arabnejad, S., Saboohi, Y. and Jamshidi, H., "Experimental Investigation of Pulsating Heat Pipes and a Proposed Correlation," Heat Transfer Engineering, Vol.31, No.10, pp.854-861. 10.1080/01457630903547636
6
2016, Han, S.H., Choi, J,W. and Kim, S.C., "Computational Analysis of Thermal Flow with Varying the Diameter and the Number of Tubes in Pulsating Heat Pipes," Journal of Computational Fluids Engineering, Vol.21, No.1, pp.86-93. 10.6112/kscfe.2016.21.1.086
7
2016, Ghanta, N. and Pattamata, A., "Modeling of Compressible Phase-Change Heat Transfer in a Taylor-Bubble with Application to Pulsating Heat Pipe (PHP)," Numerical Heat Transfer, Part A : Applications, Vol.69, No.12, pp.1355-1375. 10.1080/10407782.2016.1139980
8
2020, Li, Q., Wang, C., Wang, Y., Wang, Z., Li, H. and Lian, C., "Study on the Effect of the Adiabatic Section Parameters on the Performance of Pulsating Heat Pipes," Applied Thermal Engineering, Vol.180, pp.115813. 10.1016/j.applthermaleng.2020.115813
9
2020, Choi, J. and Zhang, Y., "Numerical Simulation of Oscillatory Flow and Heat Transfer in Pulsating Heat Pipes with Multi-Turns Using OpenFOAM," Numerical Heat Transfer, Part A : Applications, Vol.77, No.8, pp.761-781. 10.1080/10407782.2020.1717202
10
2022, Dreiling, R., Dubois, V., Zimmermann, S., Nguyen-Xuan, T., Schreivogel, P. and Di Mare, F., "Numerical Investigation of Slug Flow in Pulsating Heat Pipes Using an Interface Capturing Approach," International Journal of Heat and Mass Transfer, Vol.199, pp.123459. 10.1016/j.ijheatmasstransfer.2022.123459
11
2021, Blasiak, P., Opalski, M., Parmar, P., Czajkowski, C. and Pietrowicz, S., "The Thermal-Flow Processes and Flow Pattern in a Pulsating Heat Pipe-Numerical Modelling and Experimental Validation," Energies, Vol.14, No.18, p.5952. 10.3390/en14185952
12
1980, Lee, W.H., "Pressure Iteration Scheme for Two-Phase Flow Modelling," Multiphase Transport Fundamentals, Reactor Safety, Applications, Vol.1, pp.407-432.
13
1991, Tanasawa, I., "Advances in Condensation Heat Transfer," Advances in Heat Transfer, Vol.21, pp.55-139. 10.1016/S0065-2717(08)70334-4
14
2013, Kafeel, K. and Turan, A., "Axi-Symmetric Simulation of a Two Phase Vertical Thermosyphon Using Eulerian Two-Fluid Methodology," Heat and Mass Transfer, Vol.49, pp.1089-1099. 10.1007/s00231-013-1155-6
15
2016, Xu, Z., Zhang, Y. and Huang, J., "Modeling the Phase Change Process for a Two-Phase Closed Thermosyphon by Considering Transient Mass Transfer Time Relaxation Parameter," International Journal of Heat and Mass Transfer, Vol.101, pp.614-619. 10.1016/j.ijheatmasstransfer.2016.05.075
16
2021, Zuo, Z., Jiang, W., Qin, X. and Huang, Y., "A Numerical Model for Liquid-Vapor Transition in Self-Pressurized Cryogenic Containers," Applied Thermal Engineering, Vol.193, p.117005. 10.1016/j.applthermaleng.2021.117005
17
2021, Zuo, Z., Jiang, W. and Huang Y, "Validity Evaluation of Popular Liquid-Vapor Phase Change Models for Cryogenic Self-Pressurization Process," International Journal of Heat and Mass Transfer, Vol.181, p.121879. 10.1016/j.ijheatmasstransfer.2021.121879
18
2014, Saha, N., Das, P.K. and Sharma, P.K., "Influence of Process Variables on the Hydrodynamics and Performance of a Single Loop Pulsating Heat Pipe," International Journal of Heat and Mass Transfer, Vol.74, pp.238-250. 10.1016/j.ijheatmasstransfer.2014.02.067
19
Salome(Version 9.9.9), http://www.salome-platform.org/
20
2021, Okagaki, Y., Yonomoto, T., Ishigaki, M. and Hirose, Y., "Numerical Study on an Interface Compression Method for the Volume of Fluid Approach," Fluids, Vol.6, pp.80. 10.3390/fluids6020080
21
OpenFOAM(Version 2212) User Guide, http://www.openfoam.com/
22
2009, De Schepper, S.C., Heynderickx, G.J., and Marin, G.B., "Modeling the Evaporation on a Hybrocarbon Feedstock in the Convection Section of a Steam Cracker," Computers and Chemical Engineering, Vol.33, No.1, pp.122-132. 10.1016/j.compchemeng.2008.07.013
23
2021, Cengel, Y.A. and Cimbala, J.M., "Fluid Mechanics Fundamentals and Applications Fourth Edition," McGraw Hill.
24
2021, Cengel, Y.A. and Ghagar, A.J., "Heat and Mass Transfer: Fundamentals and Applications Sixth Edition," McGraw Hill.
25
1994, Janczuk, B. and Zdziennicak, A., "A Study on the Components of Surface Free Energy of Quartz from Contact Angle Measurements," Journal of Materials Science, Vol.29, pp.3559-3564. 10.1007/BF00352063
26
2016, Liu, X., Sun, Q., Zhang, C. and Wu, L., "High-Speed Visual Analysis of Fluid Flow and Heat Transfer in Oscillating Heat Pipes with Different Diameters," Applied Science, Vol. 6, No.11, pp.321. 10.3390/app6110321
Information
  • Publisher :Korean Society for Computational Fluids Engineering
  • Publisher(Ko) :한국전산유체공학회
  • Journal Title :Journal of Computational Fluids Engineering
  • Journal Title(Ko) :한국전산유체공학회지
  • Volume : 29
  • No :1
  • Pages :100-112
  • Received Date : 2024-03-08
  • Revised Date : 2024-03-20
  • Accepted Date : 2024-03-24
  • DOI :https://doi.org/10.6112/kscfe.2024.29.1.100
Journal Informaiton Journal of Computational Fluids Engineering Journal of Computational Fluids Engineering
Online Submission
Archives
: Vol.28, 1996~
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crossref funder-registry
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close