Original Article
2018, Carriero, A., Locatelli, M., Ramakrishnan, K., Mastinu, G. and Gobbi, M., "A review of the state of the art of electric traction motors cooling techniques," SAE Technical Paper, 2018-01-0057.
10.4271/2018-01-00572023, Konovalov, D., Tolstorebrov, I., Eikevik, T.M., Kobalava, H., Radchenko, M., Hafner, A. and Radchenko, A., "Recent developments in cooling systems and cooling management for electric motors," Energies, Vol.16, No.19, p.7006.
10.3390/en161970062021, Gundabattini, E., Mystkowski, A., Raja Singh, R. and Gnanaraj, S.D., "Water cooling, PSG, PCM, Cryogenic cooling strategies and thermal analysis (experimental and analytical) of a permanent magnet synchronous motor: a review," Sādhanā, Vol.46, No.3, p.124.
10.1007/s12046-021-01650-z2022, Raisin, J. and Merelli, M., "Comparing cooling methods for e-motors," Enginsoft, Futurities-Summer 2022, pp.14-17.
2021, Gronwald, P.O. and Kern, T.A., "Traction motor cooling systems: a literature review and comparative study," IEEE Transactions on Transportation Electrification, Vol.7, No.4, pp.2892-2913.
10.1109/TTE.2021.30758442015, Davin, T., Pellé, J., Harmand, S. and Yu, R., "Experimental study of oil cooling systems for electric motors," Appl. Therm. Eng., Vol.75, pp.1-13.
10.1016/j.applthermaleng.2014.10.0602016, Guechi, M., Desevaux, P., Baucour, P., Espanet, C., Brunel, R. and Poirot, M., "Spray cooling of electric motor coil windings," J. Comput. Multiph. Flows, Vol.8, No.2, pp.95-100.
10.1177/1757482X166538952021, Ghahfarokhi, P.S., Podgornovs, A., Kallaste, A., Vaimann, T., Belahcen, A. and Marques Cardoso, A.J., "Oil spray cooling with hairpin windings in high-performance electric vehicle motors," 2021 28th International Workshop on Electric Drives: Improving Reliability of Electric Drives (IWED), pp.1-5.
10.1109/IWED52055.2021.93763902023, Shams Ghahfarokhi, P., Podgornovs, A., Kallaste, A., Marques Cardoso, A.J., Belahcen, A. and Vaimann, T., "The oil spray cooling system of automotive traction motors: the state of the art," IEEE Transactions on Transportation Electrification, Vol.9, No.1, pp.428-451.
10.1109/TTE.2022.31895962012, Ponomarev, P., Polikarpova, M. and Pyrhönen, J., "Thermal modeling of directly-oil-cooled permanent magnet synchronous machine," 2012 XXth International Conference on Electrical Machines, pp.1882-1887.
10.1109/ICElMach.2012.63501382023, Liu, Y., Cao, J., Song, Y., Gao, Z. and Li, L., "Analysis of the immersion cooling of electric motors for hybrid aircraft," Process Saf. Environ. Prot., Vol.178, pp.695-705.
10.1016/j.psep.2023.08.0672021, Ha, T., Han, N.G., Kim, M.S., Rho, K.H. and Kim, D.K., "Experimental study on behavior of coolants, particularly the oil-cooling method, in electric vehicle motors using hairpin winding," Energies, Vol.14, No.4, p.956.
10.3390/en140409562022, Li, J., Song, S., Shi, H., Xu, Y., Meng, E. and Zhou, B., "Thermal effects of water immersion on spray cooling in non-boiling zone," Int. Commun. Heat Mass Transf., Vol.139, p.106471.
10.1016/j.icheatmasstransfer.2022.1064712005, Staton, D., Boglietti, A. and Cavagnino, A., "Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors," IEEE Trans. Energy Convers., Vol.20, No.3, pp.620-628.
10.1109/TEC.2005.8479792023, Su, X., Zhao, H. and Li, F., "Multiphysics research and loss calculation considering the fluid regime of the airgap based on high-speed pmsm," 2023 26th International Conference on Electrical Machines and Systems (ICEMS), pp.1885-1888.
10.1109/ICEMS59686.2023.103452492012, Howey, D.A., Childs, P.R.N. and Holmes, A.S., "Air-gap convection in rotating electrical machines," IEEE Trans. Ind. Electron., Vol.59, No.3, pp.1367-1375.
10.1109/TIE.2010.21003372017, Hosain, M.L., Fdhila, R.B. and Rönnberg, K., "Air-gap flow and thermal analysis of rotating machines using CFD," Energy Procedia, Vol.105, pp.5153-5159.
10.1016/j.egypro.2017.03.10452011, Fénot, M., Bertin, Y., Dorignac, E. and Lalizel, G., "A review of heat transfer between concentric rotating cylinders with or without axial flow," Int. J. Therm. Sci., Vol.50, No.7, pp.1138-1155.
10.1016/j.ijthermalsci.2011.02.0131975, Kataoka, K., "Heat-transfer in a Taylor vortex flow," J. Chem. Eng. Jpn., Vol.8, No.4, pp.271-276.
10.1252/jcej.8.2712021, Sun, S., Liu, D., Shi, W.D., Wang, Y.Z. and Kim, H.B., "Numerical simulations of heat transfer performance of Taylor-Couette flow in slit model," Arab. J. Sci. Eng., Vol.46, No.8, pp.7153-7170.
10.1007/s13369-021-05338-82023, Song, Y., Cao, J., Zhong, C., Chen, J. and Li, L., "Analysis of axial windage loss in air gap of high-speed motors under high Taylor number," J. Phys.: Conf. Ser., Vol.2430, No.1, p.012006.
10.1088/1742-6596/2430/1/0120062017, Hosain, M.L. and Fdhila, R.B., "Air-gap heat transfer in rotating electrical machines: a parametric study," Energy Procedia, Vol.142, pp.4176-4181.
10.1016/j.egypro.2017.12.3432015, Wong, A., "CFD Study of forced air cooling and windage losses in small gap region of high speed electric motors," California State Polytechnic University, Panoma
2018, Anderson, K., Lin, J. and Wong, A., "Experimental and numerical study of windage losses in the narrow gap region of a high-speed electric motor," Fluids, Vol.3, No.1, p.22.
10.3390/fluids30100222016, Nachouane, A.B., Abdelli, A., Friedrich, G. and Vivier, S., "Estimation of windage losses inside very narrow air gaps of high speed electrical machines without an internal ventilation using CFD methods," 2016 XXII International Conference on Electrical Machines (ICEM), pp.2704-2710.
10.1109/ICELMACH.2016.77329042024, Yang, C., Cai, W., Xie, Y. and Tang, Y., "Study on the fluid field of oil-cooling PMSM Considering oil enters the air gap," IEEE Trans. Appl. Supercond., Vol.34, No.8, pp.1-6.
10.1109/TASC.2024.34253492015, Romanazzi, P. and Howey, D.A., "Air-gap convection in a switched reluctance machine," 2015 Tenth International Conference on Ecological Vehicles and Renewable Energies (EVER), pp.1-7.
10.1109/EVER.2015.71129622022, Tong, W., Sun, L., Wu, S., Hou, M. and Tang, R., "Analytical model and experimental verification of permanent magnet eddy current loss in permanent magnet machines with nonconcentric magnetic poles," IEEE Trans. Ind. Electron., Vol.69, No.9, pp.8815-8824.
10.1109/TIE.2021.31115732008, Zhang, D., Wang, F. and Kong, X., "Air friction loss calculation of high speed permanent magnet machines," 2008 International Conference on Electrical Machines and Systems, pp.320-323.
2015, Deaconu, A.S. and Chirilă, A.I., "Air-gap heat transfer of a permanent magnet synchronous motor," Rev. Roum. pp.263-272.
2006, Bensow, R.E., Fureby, C., Liefvendahl, M. and Persson, T., "A comparative study of RANS, DES and LES," 26th ONR Symposium on Naval Hydrodynamic (U.S. Office of Naval Research), pp.1-13.
2021, Wang, Z., Zhang, X., Wang, Y. and Liu, J., "Comparative study between turbulence models in unsteady cavitating flow with special emphasis on shock wave propagation," Ocean Eng., Vol.240, p.109988.
10.1016/j.oceaneng.2021.1099882011, Fransen, R., Morata, E.C., Duchaine, F., Gourdain, N., Gicquel, L.Y.M., Vial, L. and Bonneau, G., "Comparison of RANS and LES in high pressure turbines," 3rd INCA Colloquium, pp.1-15.
2021, Lee, J.H., Kim, W.J. and Jung, S.Y., "Analysis and Verification of Traction Motor Iron Loss for Hybrid Electric Vehicles Based on Current Source Analysis Considering Inverter Switching Carrier Frequency," Electronics, Vol.10, No.21, pp. 2714.
10.3390/electronics102127142010, Yamazaki, K. and Fukushima, N., "Iron-Loss Modeling for Rotating Machines: Comparison Between Bertotti's Three-Term Expression and 3-D Eddy-Current Analysis," IEEE Trans. Magn., Vol.46, No.8, pp.3121-3124.
10.1109/TMAG.2010.20443842019, Yamazaki, K. and Takaki, Y., "Iron Loss Analysis of Permanent Magnet Motors by Considering Minor Hysteresis Loops Caused by Inverters," IEEE Trans. Magn., Vol.55, No.6, pp.1-4.
10.1109/TMAG.2019.29031282018, Seo, M.K., Ko, Y.Y., Lee, T.Y., Kim, Y.J. and Jung, S.Y., "Loss Reduction Optimization for Heat Capacity Improvement in Interior Permanent Magnet Synchronous Machine," IEEE Trans. Magn., Vol.54, No.11, pp.1-5.
10.1109/TMAG.2018.28431762019, Luo, C., Sun, J., Liao, Y. and Xu, S., "Analysis and Design of Ironless Toroidal Winding of Tubular Linear Voice Coil Motor for Minimum Copper Loss," IEEE Trans. Plasma Sci., Vol.47, No.5, pp.2369-2375.
10.1109/TPS.2018.28906902021, Zaghrini, C., Khoury, G., Fadel, M., Ghosn, R. and Khatounian, F., "On-line loss and global efficiency simulation tool for electric vehicles applications," in IECON 2021 - 47th Annual Conference of the IEEE Industrial Electronics Society, Toronto, ON, Canada, pp.1-6.
10.1109/IECON48115.2021.95891532003, Menter, F.R., Kuntz, M., and Langtry, R., "Ten Years of Industrial Experience with the SST Turbulence Model," Turbulence, Heat and Mass Transfer, No.4.1, pp.625-632
1998, Ducros, F., Nicoud, F. and Poinsot, T., "Wall-Adapting Local Eddy-Viscosity models for simulations in complex geometries," Numerical Methods for Fluid Dynamics VI, No.6, pp.293-299.
2021, Yin, Y., Li, H. and Xiang, X., "Oil Friction Loss Evaluation of Oil-Immersed Cooling In-Wheel Motor Based on Improved Analytical Method and VOF Model," World Electr Veh. J., Vol.12, No.4, p.164.
10.3390/wevj120401642003, Breuer, M., Jovičić, N. and Mazaev, K., "Comparison of DES, RANS and LES for the separated flow around a flat plate at high incidence," Int.l J.l Numer. Methods Fluids, Vol.41, No.4, pp.357-388.
10.1002/fld.445- Publisher :Korean Society for Computational Fluids Engineering
- Publisher(Ko) :한국전산유체공학회
- Journal Title :Journal of Computational Fluids Engineering
- Journal Title(Ko) :한국전산유체공학회지
- Volume : 30
- No :2
- Pages :68-85
- Received Date : 2025-02-21
- Revised Date : 2025-04-08
- Accepted Date : 2025-04-15
- DOI :https://doi.org/10.6112/kscfe.2025.30.2.068
Journal of Computational Fluids Engineering
