Journal of Computational Fluids Engineering ISSN:1598-6071(Print) 3022-6252(Online) 한국전산유체공학회지

2009, Ramanathan, V. and Feng, Y., “Air pollution, greenhouse gases and climate change: Global and regional perspectives,” Atmos. Environ., Vol.43, No.1, pp.37-50.

2011, Choi, I.H. and Jo, W.K., “Application of stack emissions data from tele-monitoring systems for characterization of industrial emissions of air pollutants,” Aerosol Air Qual. Res., Vol.11, No.4, pp.412-418.

2007, Luo, J. and Razinsky, E.H., “Analysis of turbulent flow in 180 turning ducts with and without guide vanes,” ASME Turbo Expo: Power for Land, Sea, and Air, Vol.47934, pp.899-908.

2015, Juraeva, M., Ryu, K.J., Jeong, S.H. and Song, D.J., “Effect of guide vanes on recovering uniform flow in a ventilation duct in an existing twin-track subway tunnel,” J. Mech. Sci. Tech., Vol.29, pp.251-258.

2019, Reghunathan Valsala, R., Son, S.W., Suryan, A. and Kim, H.D., “Study on reduction in pressure losses in pipe bends using guide vanes,” J. Vis., Vol.22, pp.795-807.

2023, Shi, L., Chai, Y., Wang, L., Xu, T., Jiang, Y., Xing, J. and Han, Y., “Numerical simulation and model test of the influence of guide vane angle on the performance of axial flow pump,” Phys. Fluids, Vol.35, No.1.

2023, Ejeh, C.J., Alawwa, F.H., Kofi, A. and Ingrid, A., “Improving flow efficiency in curved pipes during multi-phase, immiscible fluid flow using edge-tailored guide vanes,” Exp. Comput. Multiphase Flow, pp.1-10.

2023, Yu, Y., Chen, W., Kong, X., Ren, C. and Liu, J., “Design of the new guide vane for the turbo air classifier,” Mater. Werkst., Vol.54, No.2, pp.196-206.

2025, Yagmur, S., “Optimizing 3D guide vanes to minimize secondary flow and energy loss in turbulent flow through a 90−Degree bend,” Ocean Eng., Vol.319, 120219.

2020, ANSYS, Inc., “Ansys Fluent 2020R2 Theory Guide,” Canonsburg, PA.