Journal of Computational Fluids Engineering ISSN:1598-6071(Print) 3022-6252(Online) 한국전산유체공학회지

2012, Hartmann, M., Ocker, J., Lemke, T., Mutzke, A., Schwarz, V., Tokuno, H., Toppinga, R., Unterlechner, P. and Wickern, G., "Wind noise caused by the side-mirror and a-pillar of a generic vehicle model," In 18th AIAA/CEAS aeroacoustics conference (33rd AIAA aeroacoustics conference), p.2205.

2017, Shaharuddin, N.H., Ali, M.S.M., Mansor, S., Muhamad, S., Salim, S.A.Z.S. and Usman, M., "Flow simulations of generic vehicle model SAE type 4 and DrivAer Fastback using OpenFOAM," J. Adv. Res. Fluid Mech. Therm. Sci., Vol.37, No.1, pp.18-31.

1984, Ahmed, S.R., Ramm, G. and Faltin, G., "Some salient features of the time-averaged ground vehicle wake," SAE Transactions, pp.473-503.

1998, Cogotti, A., "A parametric study on the ground effect of a simplified car model," SAE Transactions, pp.180-204.

2022, Baek, M., Yoon, S. and Shin, D., "Effects of Multi-block Mesh Refinement on Automobile Aerodynamics," J. Comput. Fluids Eng., pp.99-100.

2022, Aultman, M., et al., "Evaluation of CFD methodologies for prediction of flows around simplified and complex automotive model," Comput. Fluids, Vol.236, p.105297.

2014, Wieser, D., et al., "Experimental comparison of the aerodynamic behavior of fastback and notchback DrivAer models," SAE Int. J. Passeng. Cars - Mech. Syst., Vol.7, No.2014-01-0613, pp.682-691.

2016, Collin, C., et al., "A numerical and experimental evaluation of open jet wind tunnel interferences using the DrivAer reference model," SAE Int. J. Passenger Cars-Mech. Syst., Vol.9, No.2016-01-1597, pp.657-679.

2020, Wieser, D., Nayeri, C.N. and Paschereit, C.O., "Wake structures and surface patterns of the DrivAer notchback car model under side wind conditions," Energies, Vol.13, No.2, p.320.

2012, Heft, A.I., Indinger, T. and Adams, N.A., "Introduction of a new realistic generic car model for aerodynamic investigations," SAE Technical Paper, No.2012-01-0168.

2011, Theissen, P., et al., "Experimental investigation of unsteady vehicle aerodynamics under time-dependent flow conditions-part 1," SAE Technical Paper, No.2011-01-0177.

2012, Heft, A.I., Indinger, T. and Adams, N.A., "Experimental and numerical investigation of the DrivAer model," FEDSM - Am. Soc. Mech. Eng. Eng., Vol.44755, pp.41-51.

2019, Wang, S., Avadiar, T., Thompson, M.C. and Burton, D., "Effect of moving ground on the aerodynamics of a generic automotive model: The DrivAer-Estate," J. Wind Eng. Ind. Aerodyn., Vol.195, No.N/A, p.104000.

2018, Aljure, D.E., Calafell, J., Baez, A. and Oliva, A., "Flow over a realistic car model: Wall modeled large eddy simulations assessment and unsteady effects," J. Wind Eng. Ind. Aerodyn., Vol.174, pp.225-240.

2018, Shaharuddin, N.H., Ali, M.S.M., Mansor, S., Muhamad, S. and Zaki, S.A., "Numerical study for flow over a realistic generic model, DrivAer, using URANS," J. Adv. Res. Fluid Mech. Therm. Sci., Vol.48, No.2, pp.183-195.

2001, Pope, S.B., "Turbulent flows," Cambridge University Press, Cambridge.

2017, Lietz, R., Larson, L., Bachant, P., Goldstein, J., Silveira, R., Shademan, M., ... and Mooney, K., "An extensive validation of an open source based solution for automobile external aerodynamics," SAE Technical Paper, No.2017-01-1524

1992, Menter, F.R., "Improved two-equation k-omega turbulence models for aerodynamic flows," NASA Technical Memorandum, TM-103975.

1994, Menter, F.R., "Two-equation eddy-viscosity turbulence models for engineering applications," AIAA J., Vol.32, No.8, pp.1598-1605.

2019, Lacombe, F., Pelletier, D. and Garon, A., "Compatible wall functions and adaptive remeshing for the k-omega SST model," In AIAA Scitech 2019 Forumm, p.2329.

2016, Jakirlic, S., Kutej, L., Hanssmann, D., Basara, B. and Tropea, C., "Eddy-resolving simulations of the notchback 'DrivAer'model: Influence of underbody geometry and wheels rotation on aerodynamic behaviour," SAE Technical Paper, No. 2016-01-1602.