Original Article
2000, Ward, Jr. J.E., “Reusable Launch Vehicles and Space Operations,” Occasional Paper No. 12, Center for Strategy and Technology, Air War College, Air University, Maxwell Air Force Base, Alabama.
1985, Dotts, R.L., Curry, D.M. and Tillian, D.J., “Orbiter Thermal Protection System,” Space Shuttle Technical Conference, Part 2, NASA Accession No. 85N16979.
2020, Shin, J.S., Kim, D.Y. and Choi, G.H., “Reusable Thermal Protection System in U.S.A and Europe for Re-entry,” Current Industrial and Technological Trends in Aerospace, Vol.18, No.2, pp.148-160.
2021, Park, S.H., Neeb, D., Plyushchev, G., Leyland, P. and Gülhan, A., “A Study on Heat Flux Predictions for Re-entry Flight Analysis,” Acta. Astronaut., Vol.187, pp.271-280.
10.1016/j.actaastro.2021.06.0252020, Kweon, O.J. et al., “Development of Aerodynamic Analysis and Shape Optimization Technology for Spaceplane: Research on Fundamental Technologies and Configuration Design of a Spaceplane,” KARI Project Report, Korea Aerospace Research Institute.
2019, Mankodi, T.K. and Myong, R.S., “Quasi-Classical Trajectory-Based Non-Equilibrium Chemical Reaction Models for Hypersonic Air Flows,” Phys. Fluids, Vol.31, No.10, 106102.
10.1063/1.51191472011, Roncioni, P., Ranuzzi, G., Marini, M., Battista, F. and Rufolo, G.C., “CFD Aerothermodynamic Characterization of the IXV Hypersonic Vehicle,” 7th European Symposium on Aerothermodynamics of Space Vehicles, Bruges, Belgium, Paper No. 2205059.
2021, Aprovitola, A., Montella, N., Iuspa, L., Pezzella, G. and Viviani, A., “An Optimal Heat-Flux Targeting Procedure for LEO Re-entry of Reusable Vehicles,” Aerosp. Sci. Technol., Vol.112, 106608.
2018, Qu, F., Sun, D. and Zuo, G., “A Study of Upwind Schemes on the Laminar Hypersonic Heating Predictions for the Reusable Space Vehicle,” Acta Astronaut., Vol.147, pp.412-420.
10.1016/j.actaastro.2018.03.0462004, Zoby, E.V., Thompson, R.A. and Wurster, K.E., “Aeroheating Design Issues for Reusable Launch Vehicles: A Perspective,” 34th AIAA Fluid Dynamics Conference and Exhibit, AIAA Paper 2004-2535.
2002, Meese, E.A. and Nørstrud, H., “Simulation of Convective Heat Flux and Heat Penetration for a Spacecraft at Re-entry,” Aerosp. Sci. Technol., Vol.6, No.3, pp.185-194.
10.1016/S1270-9638(02)01165-32023, Sun, J., Zhu, H., Xu, D. and Cai, G., “Aerodynamic Thermal Simulation and Heat Flux Distribution Study of Mechanical Expansion Reentry Vehicle,” Aerospace, Vol.10, No.3, 310.
10.3390/aerospace100303102020, Chae, J.H., Mankodi, T.K., Choi, S.M. and Myong, R.S., “Combined Effects of Thermal Non-Equilibrium and Chemical Reactions on Hypersonic Air Flows around an Orbital Reentry Vehicle,” Int. J. Aeronaut. Space Sci., Vol.21, No.3, pp.612-626.
10.1007/s42405-019-00243-92025, Kim, C., You, H., Kim, J.G., Kim, N. and Kim, K.H., “Effects of the Wall Electron Temperature Boundary Condition under Earth Reentry Flight Regime,” J. Comput. Fluids Eng., Vol.30, No.1, pp.59-70.
10.6112/kscfe.2025.30.1.0592019, Campbell, N.S., “Analysis Methods for Reusable Spacecraft Undergoing Aeroassist Maneuvers,” Ph.D. Dissertation, University of Colorado Boulder.
2021, Chourushi, T., Singh, S., Sreekala, V.A. and Myong, R.S., “Computational Study of Hypersonic Rarefied Gas Flow over Re-Entry Vehicles Using the Second-Order Boltzmann-Curtiss Constitutive Model,” Int. J. Comput. Fluid Dyn., Vol.35, No.8, pp.566-593.
10.1080/10618562.2022.20326802025, Park, J., Jeong, M. and Jee, S., “Application of Entropy Fix to Computations of Hypersonic Laminar and Turbulent Boundary Layers on HIFIRE-1,” J. Comput. Fluids Eng., Vol.30, No.3, pp.136-150.
2024, Park, B., Jo, S., Choi, S., Hwang, S. and Myong, R., “Computational Analysis of Aerodynamics and Static Stability of Re-entry Vehicle at Low Altitudes,” J. Comput. Fluids Eng., Vol.29, No.4, pp.10-23.
10.6112/kscfe.2024.29.4.0102025, Lee, M., Kim, K.H., Kim, N. and Kim, H., “Multi-Objective Shape Optimization of Earth Re-entry Capsule Using Low Fidelity Aero-Thermal Analysis Code,” J. Comput. Fluids Eng., Vol.30, No.1, pp.39-50.
10.6112/kscfe.2025.30.1.0392025, Stuthridge, M., “Benchmarks for Aerodynamic Modelling of Hypersonic Vehicles,” Master of Engineering Thesis, University of Canterbury.
1963, Millikan, R.C. and White, D.R., “Systematics of Vibrational Relaxation,” J. Chem. Phys., Vol.39, No.12, pp.3209-3213.
10.1063/1.17341821994, Menter, F.R., “Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications,” AIAA J., Vol.32, No.8, pp.1598-1605.
10.2514/3.121492024, Chinnaraj, R.K., Kim, M., Choi, B., Ha, T., Kim, S., Nam, M.-S. and Choi, S.M., “Evaluation of Reusable Thermal Protection System Materials Using a High-Velocity Oxygen Fuel Torch,” Materials, Vol.17, No.21, 5229.
10.3390/ma1721522939517504PMC115471872020, Siemens Digital Industries Software, “Example: Adaptive Mesh Refinement on JCM Missile at Supersonic Flow Condition.”
- Publisher :Korean Society for Computational Fluids Engineering
- Publisher(Ko) :한국전산유체공학회
- Journal Title :Journal of Computational Fluids Engineering
- Journal Title(Ko) :한국전산유체공학회지
- Volume : 31
- No :2
- Pages :36-57
- Received Date : 2026-02-19
- Revised Date : 2026-06-15
- Accepted Date : 2026-06-21
- DOI :https://doi.org/10.6112/kscfe.2026.31.2.036
Journal of Computational Fluids Engineering
